Proxies for Online Games: Latency, Accounts and Safety
Proxies can stabilise account location, but they add a network hop. Here is what to expect and what to avoid.
Players use proxies for three main reasons: keeping an account’s apparent location consistent, reaching regional servers and running several clients on separate addresses. Each has trade-offs, and none is guaranteed to be allowed by a game’s rules.
Latency: the honest answer
A proxy adds a hop between you and the game server. If the proxy is close to the server and your own route to it is poor, latency can drop; in most cases it stays the same or rises slightly. No provider can promise lower ping without measuring your specific route.
Why SOCKS5 and static IPs
Game clients open their own TCP (and sometimes UDP) connections, so a general-purpose SOCKS5 proxy is usually the best fit. A static IP keeps your account tied to one network location, which many games prefer to constantly changing addresses.
Setting up
- Order a SOCKS5-capable static plan.
- Install a proxifier-style tool.
- Add the proxy as SOCKS Version 5 with your credentials.
- Create a rule for the game’s executable only.
- Check the exit IP and test the connection before logging in.
Staying safe
- Read the game’s terms: some forbid proxies or multi-boxing and will ban accounts.
- Use one IP per account where multiple clients are allowed.
- Never share proxy credentials.
- Avoid frequent IP changes on the same account.
How a proxifier routes a game client
A proxifier does not change the game. It intercepts the outgoing connection attempts of the processes you select and, instead of letting them leave directly, opens a connection to your proxy, performs the SOCKS5 handshake (method selection, username and password as defined in RFC 1929, then a CONNECT request naming the destination) and relays the bytes. The game believes it connected directly. The game server sees the proxy’s exit IP as the source, and the proxy sees the destination address, the port and, if the client sends hostnames, the name itself.
The practical consequence is that rules apply per process, and many games are several processes: a launcher or patcher, the game client and sometimes helper or protection services. If the launcher authenticates through the proxy while the client connects directly, the account is seen from two addresses in one session. Add every executable on the login path to the rule, then open the proxifier’s live connections view and confirm that each connection shows your rule and proxy. Whether a title tolerates this kind of software is a question for its rules and anti-cheat policy: some protection suites dislike tools that hook network calls, and no proxy provider can answer that for you.
UDP: what a TCP-only test cannot tell you
SOCKS5 can relay UDP through the UDP ASSOCIATE command (RFC 1928). The client keeps a TCP control connection open, asks the proxy for a UDP relay endpoint and then sends each datagram, wrapped in a small SOCKS5 header, to that endpoint; the association ends when the control connection closes. Not every proxy server implements it, not every proxifier uses it for every application, and an HTTP proxy cannot carry UDP at all. Games that use UDP for real-time state are the ones most affected.
What is confirmed here: static mobile plans list UDP via SOCKS5. For the Knight Online, Metin2 and Silkroad packages, what is confirmed is static Turkish IPs with HTTP or SOCKS5 selectable at checkout; UDP support is not confirmed, so ask sales before you depend on it. The SOCKS5 proxy checker on this site tests method negotiation, authentication, CONNECT by domain and TLS over TCP only, so a pass says nothing about UDP. To learn what your client really uses, capture its traffic for a minute with a packet analyzer and filter on udp; if nothing shows up during login and play, the question is moot for that title.
Sizing IPs for several clients
Start from what the game’s rules allow: how many simultaneous clients per account, per address and per machine. Then compute the IPs you need as clients ÷ clients allowed per IP, rounded up, plus a few spares so you can retire an address that misbehaves without touching the other mappings. Packs come in fixed sizes, so you buy the next size up: Knight Online packs are 1, 4, 8, 16, 32, 48, 100 and 250 IPs, Metin2 packs are 1, 4, 8, 24, 48, 96, 150 and 250, and Silkroad packs are 1, 4, 10, 25, 50, 100, 150 and 250.
A worked example with one client per IP (illustrative): 6 clients plus 1 spare is 7 IPs, which means the 8-IP pack for Knight Online or Metin2 and the 10-IP pack for Silkroad. For 20 clients plus 2 spares, 22 IPs, the nearest packs are 24 for Metin2, 25 for Silkroad and 32 for Knight Online. The same need therefore leaves 2 unused IPs on Metin2, 3 on Silkroad and 10 on Knight Online, so compare the pack ladder of your own title before choosing. Keep one fixed row per account (account label, IP, port, protocol, date assigned) and avoid reshuffling it: an account that always connects from the same address is easier to keep consistent than one that moves around.
Measure the latency you actually get
Do not predict latency; measure it, and measure the shape rather than the average. The total delay is roughly the time from you to the proxy plus the time from the proxy to the game server, and games react more to jitter and packet loss than to a steady extra few milliseconds. The proxy checker’s latency figure is taken from our server, not from your PC, so it is useful for comparing proxies but not for predicting your ping.
- Record a baseline without the proxy: the in-game ping display if there is one, or ping and a trace route to the game server address, remembering that some servers ignore ICMP.
- Time the first leg and the whole path with curl, using the loop below, and look at the spread (minimum, median and maximum) instead of a single run.
- Repeat at the hours you actually play, because shared routes and capacity vary through the day.
- Compare in-game ping with and without the proxy on the same server, and judge by the jitter you can see over a 10 to 15 minute session.
for i in 1 2 3 4 5 6 7 8 9 10; do
curl -s -o /dev/null -w "to_proxy=%{time_connect}s through_to_tls=%{time_appconnect}s\n" --proxy socks5h://USER:PASS@HOST:PORT https://example.com
doneHere time_connect is the TCP connection to the proxy itself, roughly one round trip on your first leg, and time_appconnect also includes the SOCKS5 handshake, the proxy’s connection to the destination and the TLS handshake. Use a nearby HTTPS site for this loop rather than the game server: it measures the path, not the game protocol. On Windows, run it in Git Bash or WSL, or adapt it to curl.exe in PowerShell.
Troubleshooting disconnects and failed logins
Work from the outside in: first prove that the proxy works, then prove that the game is using it. The proxy checker separates proxy faults from game faults because it reports specific error codes such as auth, refused, timeout and not_socks5. Once the proxy passes, look for the pattern that matches your symptom.
- Disconnects after a few idle minutes: quiet TCP connections are dropped by NAT devices and firewalls with idle timers, and a proxy adds one more such device. Check whether the client sends keep-alives and whether staying active in-game changes the timing.
- An instant “cannot connect”: the wrong protocol selected for your tool (HTTP versus SOCKS5), the wrong port, wrong credentials, or an allowlist that no longer contains your home address after your ISP changed it.
- The launcher works but the game hangs at login: the game process is not covered by a rule, or it resolves hostnames locally and gets a different answer than the proxy’s region would. Check the connections view and enable remote name resolution in the proxifier.
- Rubber-banding at certain hours: loss or jitter on one of the two legs. Compare your measurements across the day before blaming the game.
- Several clients dropping together: a shared bottleneck, either your own uplink or too many clients crowded onto one address. Spread the clients across more IPs.
Account safety beyond the basics
Consistency is the main lever you control. Choose an IP for each account and keep it. Do not log the same account in alternately from your home connection and from the proxy, because the location flip-flop looks like account sharing or takeover. Keep the credentials private, since traffic sent by someone else through them arrives from the same address as your account.
A proxy is not a way around enforcement. Do not use one to return after a ban, to bypass a regional restriction the publisher forbids, to run bots or to cheat; that violates the game’s terms and acceptable use, and we do not support it. If a title’s rules are unclear about proxies or multiple clients, ask the publisher’s support, keep the reply and start with the smallest pack. Titles other than Knight Online, Metin2 and Silkroad are available only on request via WhatsApp at +90 850 550 34 60.
Frequently asked questions
Can I use an HTTP proxy for a game instead of SOCKS5?
Sometimes. A proxifier can send a program’s TCP connections through an HTTP CONNECT proxy, and the gaming plans here let you choose HTTP or SOCKS5 at checkout. But an HTTP proxy cannot carry UDP, and some HTTP proxies restrict CONNECT to a few ports, which can block a game’s login port. SOCKS5 is the safer default unless your tool requires HTTP.
Does a proxy protect me from DDoS attacks in a game?
No such protection is listed for these plans. A proxy changes the source address the game server sees, which can keep your own address out of view, but it does not filter attacks, and a flood aimed at the proxy’s address can still disrupt your session. Do not treat it as a security product.
Which pack should I buy first?
The 1-IP pack, which exists for Knight Online, Metin2 and Silkroad. Use it to test login, a full play session and reconnection behavior with your real client and under the game’s rules before you scale. No ping or compatibility guarantee is made, so a small test is the cheap way to find out.