Support

Most problems are configuration issues. Start with the guides and tools, then message us if you are still stuck.

  • Setting up a proxy

    Follow the Windows SOCKS5 guide or the product page steps for your tool, browser or game client.

    Setup guides
  • Finding your credentials

    After ordering, host, port, username and password are shown in your customer panel.

    Log in
  • Testing the connection

    Use the proxy checker to see whether a proxy answers and which IP it exits from.

    Proxy tools
  • Orders and billing

    Order status, renewals and payment details are managed in the customer panel.

    Log in

In depth

The details that decide the outcome

A layered method for fixing a connection

Most connection problems sit in one of four layers, and testing them in order saves hours. First, reachability: can your machine open a TCP connection to the proxy host and port at all? Second, protocol: does the endpoint speak the protocol you configured, HTTP or SOCKS5? Third, authentication: are the username and password, or your whitelisted IP, accepted? Fourth, the destination: does the proxy successfully reach the site you want? Because each layer depends on the one before it, an error in the destination layer tells you nothing until the first three pass.

Change one thing at a time and record each result. If the port checker reports closed or filtered, stop and check the port number, the protocol and whether the order is active in the customer panel; if your plan uses IP whitelisting, remember that the checker connects from our server, not yours. If the port is open but the checker reports a protocol error, you probably have HTTP and SOCKS5 mixed up, which is a common cause. Only when the first three layers pass should you suspect the destination, a block, or your own tool’s settings.

LayerFree tool to useHealthy result
ReachabilityPort CheckerThe proxy port reports open from the public internet.
ProtocolHTTP Proxy Checker or SOCKS5 Proxy CheckerCONNECT is accepted, or SOCKS5 method negotiation completes.
AuthenticationProxy CheckerNo auth error with your username and password.
Exit addressProxy Checker or IP Address CheckerThe reported IP is the proxy’s, not your own.
DestinationHTTP Headers Checker, then your own clientThe site answers normally without a proxy, so any difference through the proxy is about the proxy path.

Credentials, whitelisting and special characters

After an order, the host, port, username and password appear in your customer panel. Many failures at the authentication layer are copy errors: a trailing space, a lowercase letter that should be uppercase, or a password pasted from a chat client that replaced a character. Copy the values from the panel again, paste them into a plain text field first and look at them. Remember that each order has its own credentials, so the login for one order will not necessarily work on another.

If your proxy URL contains a password with reserved characters such as @, :, / or #, the URL parser may split it in the wrong place. Percent-encode those characters (for example @ becomes %40) or enter the username and password in separate fields when your tool offers them. Some tools also apply the proxy only to HTTP and not to HTTPS, or only to the browser and not to background updaters, so a correct credential can still seem useless when the traffic never reaches the proxy.

IP whitelisting is the alternative to a password: the proxy accepts connections from addresses you have registered, and some products offer it in the customer panel. Find your public address with the IP Address Checker while you are on the network that will use the proxy. Home and mobile connections often change address, and addresses behind carrier-grade NAT are shared with other subscribers, so a whitelist can stop matching or admit more people than you intended. If your address is IPv6 and the whitelist form expects IPv4, or the option is missing, ask support before assuming it is available.

Never post passwords in screenshots or public channels. For a support message, the plan name, the proxy address and the error are usually more useful than the password itself.

Reading error messages from the free tools

The proxy checkers return a short error code instead of a vague failure, and each code points at a different layer. The Proxy Checker detects HTTP or SOCKS5 automatically, accepts up to 10 proxies per request, reads the exit address through an HTTPS IP-echo service and reports latency, so a healthy result is a different IP from yours plus a response time. The HTTP Proxy Checker tests CONNECT; the SOCKS5 Proxy Checker tests method negotiation, username and password authentication and a connect by domain name over TCP only, without UDP.

A worked reading: you paste five proxies from one order into the Proxy Checker. Four return an exit IP with latencies of roughly 150 to 300 ms (example values), and one returns refused. Because the other four show that your credentials, protocol and network path are fine, the problem is isolated to that entry: compare its port with the others, try the opposite protocol, and send the failing line to support if it still refuses. Note that blocked_address means the tool will not test private, loopback, link-local, carrier-grade NAT or reserved addresses, so it cannot be used to probe internal networks.

Error codeUsually meansNext step
authThe proxy rejected the username or password, or your IP is not whitelisted.Re-copy the credentials from the panel and check any whitelist.
refusedNothing accepted the TCP connection on that host and port.Check the port number and that the order is active.
timeoutNo answer arrived in time; a firewall may be dropping packets or the host is unreachable.Retest once, then check host and port; report it if it repeats.
not_http_proxy or not_socks5The endpoint answered, but not as the protocol you tested.Swap the protocol and test again.
connect_deniedThe proxy refused to open a tunnel to the test destination.Retest with another proxy from the same order, then ask support.
tls or no_responseThe tunnel opened but the TLS handshake failed or no data came back.Retest, then compare with another proxy from the same order.

Contacting sales or support with the right details

A support message is resolved fastest when it can be reproduced without a back-and-forth. Include the plan name exactly as shown on the order page, the protocol you chose, the proxy address and port that fail, and the username (not the password). Add the free tool and the exact error code it returned, the date and time with your time zone, and what you changed just before the problem began. If only some IPs fail, list which ones, because a pattern across a pack points to a different cause than a single bad entry.

Set expectations realistically. WhatsApp and phone at +90 850 550 34 60 are the published channels, and messages open with a ready-made first line you can complete. Response times for individual messages are not guaranteed. For sales questions, state your target countries, expected traffic, protocol and whether you need static or rotating addresses. Questions that decide a purchase, such as refund or replacement terms, exclusivity of IPs, the location of a datacenter pack, or rotation timing on rotating mobile plans, are best asked and answered in writing before you pay.

  • Plan name and quantity as shown on the order page, plus the billing period.
  • Protocol selected at checkout (HTTP or SOCKS5) and the protocol your tool uses.
  • The failing host and port, and a working one for comparison if you have it.
  • Tool name, exact error code and timestamp with time zone.
  • Your software, its version and operating system, and whether the same proxy works in curl.
  • The target site, only if the problem is a block rather than a connection failure.

FAQ

Support questions

My proxy does not connect — what should I check first?

Confirm host, port, protocol, username and password, then test with the proxy checker. A refused connection usually means a wrong port or protocol.

The exit IP did not change.

Your application may bypass the proxy. Check the system proxy settings, use a proxifier for apps, and test again with the IP address checker.

How do I whitelist my IP?

IP whitelisting is available for some products in the customer panel. If the option is not shown, ask support.

Where do I get a refund or replacement?

Refund and replacement rules are not published on this site. Contact support through WhatsApp with your order details.

Why does the Proxy Checker fail when the proxy works on my computer?

The checker connects from our server, not from your device. If your plan uses IP whitelisting, the proxy sees an address that is not on your list and rejects it, which shows up as an auth or refused result. Test from your own machine, for example with curl, and use the tools mainly for proxies that sign in with a username and password.

Why do two websites show different countries for the same proxy IP?

Geolocation databases are compiled by different companies and update at different speeds, so they can disagree, especially for recently reassigned addresses. The IP Information tool shows registry (RDAP) data, which describes who holds the address, not where a device physically is. Static ISP, mobile and gaming IPs on this site are listed as Turkey-based; if a database disagrees, ask support to confirm before assuming a fault.

Can I test a proxy that sits on my local network?

No. The tools refuse private, loopback, link-local, carrier-grade NAT, multicast, reserved and cloud-metadata addresses, so they cannot be used to probe internal networks. For a local proxy, test with curl or your own tooling on the same network.

Only some of my proxies fail. Is the whole order affected?

Not necessarily. Test every entry, then compare the failures: the same port, the same subnet or the same time window point to different causes than one isolated address. A single IP can also be blocked by one website while working elsewhere, so check it with the Proxy Checker, which reaches a neutral IP-echo service, before blaming the proxy. Send the lists of failing and working entries to support if the pattern persists.