IPv4 datacenter proxies for fast, high-volume work
IPv4 addresses hosted in data centers: the most economical way to run large, repeatable workloads where speed and price per IP matter more than looking like a home connection.
A datacenter proxy exits to the internet from an address that belongs to a hosting or cloud network rather than a household ISP. The upside is practical: these IPs are cheap, fast and plentiful, and they stay on the same address for as long as your order is active.
The trade-off is reputation. Every large website can recognise datacenter ranges, and some treat them with more suspicion than a home connection. That is why datacenter proxies shine on tolerant targets — public data, APIs, your own infrastructure — and struggle on heavily defended consumer sites.
02
When datacenter beats residential — and when it does not
Choose datacenter when you need many IPs at a low price, when the target does not fingerprint network ownership, or when throughput matters more than disguise. Typical examples are uptime checks, bulk fetching of open pages, QA from different addresses and general automation.
Choose ISP or residential proxies when the destination actively scores IP reputation, when you must keep one believable identity across a session, or when your account is tied to a home-network address. Our comparison table and the residential vs datacenter guide walk through the decision in detail.
Use cases
Where it fits best
High-volume data fetching
Spread large numbers of requests across a pool of static IPs on sites that allow automated access.
Availability and QA checks
Test your own services from several external addresses, or watch endpoints from outside your network.
Open-web monitoring
Track public pages, feeds and catalogs where speed and cost matter more than a household identity.
Setup
Set up IPv4 Datacenter Proxy
01
Pick a pack size
Choose 30, 100, 250 or 1,000 IPs from the plans table.
02
Order and receive credentials
Press Buy, complete the order and collect the proxy list and login from your customer panel.
03
Configure your tool
Enter host, port, username, password and protocol (HTTP or SOCKS5) in your scraper, browser or script.
04
Verify before scaling
Run a few IPs through the proxy checker to confirm the exit address and latency.
Sizing a pack from request budgets, with worked arithmetic
Start from the target, not the catalog. Decide how many requests per minute one IP may send before the site slows, throttles or challenges you; call that the per-IP budget. The IPs you need equal daily requests divided by (budget times active minutes per day), plus 30% for retries and uneven distribution. Example (illustrative): 500,000 pages a day, a budget of 10 requests per minute and a 24-hour schedule give 14,400 requests per IP per day, so 35 IPs; with the 30% margin you need about 45. That points to the 100-IP pack rather than the 30-IP pack.
The table converts each pack into a daily ceiling at the same illustrative budget. The 30-IP pack tops out at 432,000 requests a day, which is why the 500,000-page example needs the 100-IP pack even though the smaller one looks cheaper. Price per IP falls steeply with size: moving from 30 to 100 IPs adds only 150 TRY for 70 more addresses, and the 1,000-IP pack costs 2.00 TRY per IP. Prices are in Turkish lira, excluding taxes, and datacenter plans are billed monthly only, so a longer commitment will not lower them.
Bandwidth is the second axis. The listing says up to 100 Mbit, which is 12.5 MB per second, or at most about 1 TB per day if the link were saturated around the clock. The listing does not say whether that figure applies to each IP or to the whole order, so ask sales before planning very large transfers. In practice crawlers are limited by target response time long before port speed: 40 concurrent connections at 500 ms per response complete about 80 requests per second, and at 30 KB per page (illustrative) that is roughly 19 Mbit, well inside the listed ceiling.
Pack
Monthly price (TRY)
Price per IP (TRY)
Daily ceiling at 10 requests/min per IP (illustrative)
30 IPs
250
8.33
432,000
100 IPs
400
4.00
1,440,000
250 IPs
750
3.00
3,600,000
1,000 IPs
2,000
2.00
14,400,000
Round up, then watch the first week: if no IP ever nears its budget and no 429 responses appear, you over-bought; if 429s cluster on a few IPs, fix the distribution before buying more.
02
Rotation and pacing strategies for a static IP list
A datacenter pack does not rotate by itself, so rotation is a feature of your client. The simplest scheme is round-robin: take the next IP in the list for each request. It spreads load evenly but ignores health, so one blocked IP keeps receiving traffic. Better is a pool with per-IP state: a token bucket that enforces the request budget, a failure counter, and a cooldown. When an IP returns 429, 403 or a challenge page, remove it for a cooldown window (for example 15 minutes, doubling after each repeat, as an illustration) and re-admit it with a single probe request.
Some targets care about continuity rather than volume. If a site ties a session cookie, cart or login to the source IP, send every request of that session through the same address. Derive the choice from a stable key, such as hash(account ID) modulo pool size, so the mapping survives restarts without storing state. Keep the mapping separate from the failure logic: if the assigned IP is on cooldown, pick the next one deterministically and expect the site to treat it as a new visitor, which may mean logging in again. Log which IP served which key so you can explain a block afterwards.
Strategy
How it works
Best for
Main risk
Round-robin
Takes the next IP in the list for every request
Tolerant targets with uniform load
Keeps sending traffic to blocked IPs
Random with cooldown
Picks any healthy IP and benches failures for a window
Mixed targets and unattended crawls
Needs health bookkeeping in your client
Sticky by key
Hashes an account or domain to one fixed IP
Logins, carts and multi-step flows
A blocked IP strands every key mapped to it
Domain partitioning
Gives each target site its own subset of the pool
Several targets with different tolerance
Smaller pool available per target
Token bucket per IP
Caps each address at a fixed requests-per-minute budget
Any site with a known or measured limit
Slower bursts and timer logic to maintain
Add random jitter (for example 0.5 to 2 seconds) to delays instead of a fixed interval, but treat pacing as courtesy to the target first and camouflage second.
03
Connecting curl, Python, browsers and proxifier-style tools
The datacenter order form has no protocol selector, so the first task after delivery is to learn what your port speaks. Paste one line of your list into the proxy checker, which tries HTTP and SOCKS5 automatically and reports the exit IP, latency and, on failure, a code such as auth, refused, not_http_proxy or not_socks5. Once you know the protocol, build the URL as scheme://user:pass@host:port. If the password contains characters such as @, : or /, percent-encode them (for example @ becomes %40) or the client will split the string in the wrong place.
Client behavior differs in details that matter. With an HTTP proxy, HTTPS sites are reached through a CONNECT tunnel, so the proxy URL itself uses the http scheme even when the target is https; writing https://host:port for the proxy makes most clients attempt TLS to the proxy and fail. With SOCKS5, prefer the socks5h scheme in curl and Python so the hostname is resolved by the proxy rather than by your machine; plain socks5 resolves locally, which can leak lookups and fail for names that resolve differently from the proxy side.
curl: curl -x http://USER:PASS@HOST:PORT https://example.com/ for an HTTP proxy, or curl -x socks5h://USER:PASS@HOST:PORT https://example.com/ for SOCKS5; add -v to see the CONNECT exchange or the SOCKS handshake.
Python requests: use the same proxy URL for both the http and https keys of the proxies dictionary; for SOCKS5 install the socks extra (requests[socks]) and use the socks5h scheme.
Playwright and Puppeteer: Playwright takes server, username and password in its proxy launch option; Puppeteer passes the server as a launch argument and supplies the credentials with page.authenticate.
Browsers and anti-detect profiles: enter one IP per profile with host, port, type, username and password, then verify the exit address inside the profile before logging in anywhere.
Proxifier-style tools: add the proxy as an HTTPS (CONNECT) or SOCKS5 entry and write per-application rules so programs without proxy settings still go through it.
04
Reading reputation signals, monitoring and responsible use
Sites decide whether a datacenter request is welcome from several signals at once. Network ownership is one: the IP information tool shows the registry (RDAP) record and reverse DNS for any address, the same kind of ownership data a target can look up when it compares your address with lists of hosting ranges. Behavior is another: request rate per IP, missing or inconsistent headers, no cookies, a TLS handshake that does not match the claimed browser, and strictly sequential crawling. A clean IP with a robotic client still gets challenged, so fix the client before blaming the pool.
Measure outcomes per IP, not only in aggregate. Track four numbers per hour: success rate (2xx responses divided by attempts), block rate (403, 429 and challenge pages), median and 95th-percentile latency, and bytes per successful page. As an illustration, bench any IP automatically when its block rate exceeds 5% over an hour. To check the pack itself, spot-check up to 10 proxies per request with the proxy checker, which is rate-limited and so is not a continuous monitor: a sudden run of timeout or refused codes across many IPs points to a network or credential problem rather than a target block.
Datacenter proxies are for lawful automation. Read the target’s terms and robots.txt, prefer official APIs or data licenses where they exist, identify your crawler honestly when the site asks you to, and keep request rates low enough that you never degrade the service for real users. A proxy changes your network address; it does not make activity that a site prohibits permitted, and it is not a tool for fraud, spam, credential stuffing or evading enforcement. If personal data is involved, the privacy rules that apply to you still apply when the request comes from a proxy.
Before you order
Buyer’s checklist
0 / 6
Troubleshooting
When something does not work
The five symptoms we see most often, what usually causes them and the quickest fix.
Likely cause
The username or password is wrong, or a special character in the password was not percent-encoded, so the client split the URL in the wrong place.
Fix
Re-copy the credentials from the customer panel, percent-encode characters such as @ and :, and retest one IP in the proxy checker before running the full list.
Likely cause
The port or protocol is wrong (a SOCKS5 client pointed at an HTTP port, or the reverse), or an outbound firewall on your side blocks the proxy port.
Fix
Let the proxy checker detect the protocol, use the port checker to see whether the port is reachable from outside your network, and compare with a connection from another network.
Likely cause
The client was told that the proxy itself speaks TLS (an https:// proxy URL), or a local inspection tool is intercepting the tunnel.
Fix
Use an http:// proxy URL for HTTP proxies even when the target is https, confirm CONNECT with the HTTP proxy checker, and disable any local inspection tool for the test.
Likely cause
Those sites score datacenter ranges harshly or detect the client itself through its headers, TLS handshake or request rhythm.
Fix
Slow down, make headers coherent with a real browser, test one site at a time, and move that target to an ISP or residential plan if blocks persist at low volume.
Likely cause
Load is concentrated on a few IPs because of connection reuse, sticky hashing or an uneven scheduler, so some exceed the per-IP budget while others sit idle.
Fix
Count requests per IP per minute, enforce a token bucket per address, and pick the least recently used IP instead of a random one.
Glossary
Terms you will meet
ASN (autonomous system number)
The identifier of the network operator that announces an address range on the internet. Websites and reputation lists use it to tell hosting networks from consumer ISPs.
CONNECT tunnel
The HTTP method a client uses to ask an HTTP proxy to open a raw TCP connection to a host and port. HTTPS then passes through encrypted, so the proxy sees the destination but not the content.
Per-IP budget
The number of requests per minute you allow a single address to send to one target. Pack size is derived from it.
Round-robin
A scheduling rule that uses each IP in turn. It spreads load evenly but ignores whether an IP is healthy.
Cooldown window
A period during which an IP that received a block or rate-limit response is kept out of rotation before being tried again.
Port speed
The maximum link rate listed for the plan, here up to 100 Mbit. It is a ceiling, not a throughput guarantee.
The plans are sold as packs of IPs assigned to your order with private credentials. If you need written confirmation of exclusivity for a specific pack, ask sales before ordering.
Which protocols are supported?
The provider lists HTTP and SOCKS5 for datacenter proxies. The datacenter order page has no protocol selector, so confirm your preferred protocol with sales when you order.
Can I choose the country?
Not on the order page. If you need IPs in a specific country, contact sales and we will say whether it can be supplied.
Is traffic really unlimited?
The plans are listed with unlimited traffic and a 30-day usage period. Fair-use and abuse rules still apply, as with any shared network.
Datacenter or ISP proxy — which should I buy?
Datacenter for volume and price; ISP when the target scores IP reputation or you need a stable, household-like identity. Both are static.
How many IPs do I need for my crawl?
Divide your daily request count by the requests one IP may send per day without trouble (budget per minute times active minutes), then add about 30% for retries. The sizing section above has a worked example; if you are unsure of the budget, start with the 30-IP pack and measure.
Can I use the same credentials from several servers at once?
Authentication is by username and password, so any machine that has them can connect. Limits on simultaneous connections or on the number of source machines are not published, and IP whitelisting is not listed for datacenter plans, so ask sales if you plan heavy parallel use.
Does unlimited traffic mean I can saturate the 100 Mbit port all day?
The plans are listed with unlimited traffic and a port speed of up to 100 Mbit, and fair-use rules still apply. The listing does not say whether the speed figure is per IP or for the whole order, so ask sales before building a workload around sustained maximum throughput.
How can I tell whether a site has flagged my IPs?
There is no universal reputation score. Watch for 403, 429 and CAPTCHA responses per IP, compare them with a request from a home connection, and use the IP information tool to see the registry record a site can see. If the same IP works on one site and is blocked on another, the cause is that site’s policy rather than a fault in the proxy.
Can the proxy read my HTTPS traffic?
With a CONNECT tunnel the proxy sees the destination host and port and the amount of data, but not the encrypted content, as long as your client validates certificates. Sending credentials or personal data over plain HTTP exposes them to every hop, so use HTTPS targets for anything sensitive.